How Many Gallons Are in My Tank?
A horizontal tank 48 in across and 72 in long holds 564.0 gallons when full. With 24 in of liquid, half its diameter, it holds 282.0 gallons: about 1,068 liters, or 37.7 cu ft.
In a round tank lying on its side, gallons don't follow the dipstick in a straight line. The first 12 in of liquid hold 110.3 gallons, and the next 12 in add 171.7 more.
Gallons in a 48 × 72 in horizontal tank by liquid height:
| Liquid height | Gallons | Full |
|---|---|---|
| 6 in | 40.7 | 7% |
| 12 in | 110.3 | 20% |
| 18 in | 193.2 | 34% |
| 24 in | 282.0 | 50% |
| 30 in | 370.8 | 66% |
| 36 in | 453.8 | 80% |
| 42 in | 523.3 | 93% |
| 48 in (full) | 564.0 | 100% |
Every flat-ended horizontal tank 48 in across follows the same percentages, whatever its length. A tank twice as long holds twice the gallons at every height.
Gallons per Inch
An inch of liquid near the middle of the 48 × 72 in tank holds 14.96 gallons, while an inch near the bottom or the top holds about 5.96. That is why a dipstick reading needs a chart for round tanks lying down.
Gallons per inch of depth at different liquid heights in the same tank:
The curve is symmetric: at 46 in the tank gains as little per inch as at 2 in. At the middle of a 500-gallon propane tank, 41 in across, an inch is worth about 17.0 gallons of its water capacity.
Standing cylinders and boxes are simpler, the same at every inch. A vertical tank 64 in across holds 13.93 gallons per inch from bottom to top, and a 48 × 24 in box holds 4.99.
Horizontal Tank Chart by Percent
A horizontal tank with flat ends fills the same way at any size, so one chart reads them all. Divide the liquid height by the inside diameter, find the row, and multiply the percent full by the tank's full gallons:
| Liquid height, % of diameter | Tank full |
|---|---|
| 5% | 1.9% |
| 10% | 5.2% |
| 20% | 14.2% |
| 25% | 19.6% |
| 30% | 25.2% |
| 40% | 37.4% |
| 50% | 50.0% |
| 60% | 62.6% |
| 70% | 74.8% |
| 75% | 80.4% |
| 80% | 85.8% |
| 90% | 94.8% |
| 95% | 98.1% |
For example, 10 in of liquid in a tank 41 in across is 24% of the diameter, and the tank is 18.9% full. Tanks with rounded or dished heads fill a little differently near the ends; the calculator adds the heads exactly.
Tank Capacity Chart
A round tank holds the same gallons for every foot of its length lying down, or every inch of its depth standing up. Both depend only on the inside diameter:
| Inside diameter | Gallons per foot | Gallons per inch |
|---|---|---|
| 24 in (2.0 ft) | 23.5 | 1.96 |
| 30 in (2.5 ft) | 36.7 | 3.06 |
| 36 in (3.0 ft) | 52.9 | 4.41 |
| 42 in (3.5 ft) | 72.0 | 6.00 |
| 48 in (4.0 ft) | 94.0 | 7.83 |
| 60 in (5.0 ft) | 146.9 | 12.24 |
| 72 in (6.0 ft) | 211.5 | 17.63 |
| 84 in (7.0 ft) | 287.9 | 23.99 |
| 96 in (8.0 ft) | 376.0 | 31.33 |
| 120 in (10.0 ft) | 587.5 | 48.96 |
Multiply gallons per foot by the length in feet for a full horizontal tank: a 48 in tank 6 ft long holds 94.0 × 6 = 564.0 gallons. For a vertical tank, multiply gallons per inch by the liquid depth in inches.
How to Calculate Tank Volume
Find the volume in cubic inches, then divide by 231, the number of cubic inches in a US gallon. Measure inside the tank, all in inches.
Vertical Cylinder
Horizontal Cylinder
Lying down, the liquid's cross-section is a circular segment. Its area is the wedge of the circle under the angle θ minus the triangle above the liquid:
Work the angle in radians. At 12 in of liquid, (r − h) ÷ r = 0.5 and acos(0.5) = 1.0472, so the segment is 576 × 1.0472 − 12 × √432 = 353.8 sq in.
Rectangular Tank
Length × width × liquid height ÷ 231. A 48 × 24 in tank with 18 in of water: 48 × 24 × 18 = 20,736 cu in, or 89.8 gallons.
In Liters and Cubic Meters
Work in centimeters and divide cubic centimeters by 1,000 for liters, or work in meters for cubic meters. A vertical tank 150 cm across with 120 cm of water: 3.1416 × 75² × 120 = 2,120,575 cu cm, or 2,121 liters (2.12 m³). One US gallon is 3.785 liters, and a cubic foot holds 7.48 gallons.
To fill or empty a tank, divide the gallons by the flow: the 282.0 gallons of room left in the default tank take about 28 minutes at 10 gpm. Check the water velocity to see how much a supply pipe can carry.
Tank Volume Formulas by Shape
Every shape follows the same idea: the area of the liquid's cross-section times the tank's length, or the volume of the pieces added up:
- Vertical cylinderV = π × r² × h
- Horizontal cylinderV = L × segment(r, h)
- RectangularV = L × W × h
- Cone bottomV = πr²k ÷ 3 + πr²(h − k)
- Propane (round ends)V = segment × straight + ends
- Oil tank (oval)V = oval area at h × L
- Cone bottom: the cone holds a third of a cylinder of the same depth. A tank 48 in across with a 48 in straight side over a 24 in cone holds 438.7 gallons full, 62.7 of them in the cone. With 36 in of liquid, 12 in above the cone, it holds 156.7.
- 2:1 elliptical heads: common on industrial horizontal tanks, each head a quarter of the diameter deep. A pair holds π × D³ ÷ 12 when full, so the 48 × 72 in shell grows from 564.0 to 689.4 gallons. Hemispherical heads, half the diameter deep, make it 814.7.
- Propane tanks: a straight cylinder with a half sphere at each end. Enter the length end to end in the Propane mode.
- Oil tanks: flat sides with round ends, standing or lying. The Oil Tank mode takes the narrow side, the wide side and the length.
For fish tanks, find the gallons from the glass size. Pools and ponds have their own shapes and depth changes: use the pool volume calculator or work out a pond's gallons.
How to Measure a Tank
- 1Measure inside the tank if you can reach in. The outside size includes the wall; on a poly tank, subtract twice the wall thickness from the diameter.
- 2If you can only reach the outside of a round tank, wrap a tape around it and divide by 3.1416 for the diameter. A 150.8 in circumference is a 48 in tank.
- 3Measure the length of a horizontal tank along its straight shell, seam to seam, and choose its ends: flat, 2:1 elliptical or hemispherical.
- 4Push a straight stick or a tank gauge stick to the bottom at the middle of the tank, where the liquid is deepest, and read the wet mark.
- 5Compare the result with the maker's rated gallons. Domed tops, rounded corners and fittings make most rated capacities a little lower than the plain shape.
275-Gallon Oil Tank Chart
A 275-gallon home heating oil tank measures 44 × 27 × 60 in on Granby's spec sheet, with rounded ends rather than square corners. As a box it would hold 308.6 gallons; its rounded shape holds about 267.9, and Granby's own chart reads 273.8 when full.
The tank standing, with 22 in of oil:
Gallons at each oil depth, standing:
| Oil depth | This calculator | Granby chart |
|---|---|---|
| 5 in | 19.0 | 19.0 |
| 10 in | 50.1 | 51.2 |
| 22 in | 134.0 | 136.9 |
| 30 in | 190.1 | 194.3 |
| 40 in | 254.2 | 259.8 |
| 44 in (full) | 267.9 | 273.8 |
The two agree within the 2% precision Granby states for its chart. Between about 14 and 30 in, where the sides are flat, every inch holds 7.01 gallons. Lying on its side, the same tank is 27 in high, and 13.5 in of oil is half full.
Propane Tank Sizes
Propane tanks are rated by how much water they hold and filled to about 80% of that, to leave room for the liquid to expand. OSHA's rule works out to 79.8 gallons in a 100-gallon tank.
| Tank | Size (Manchester Tank) | Propane at 80% |
|---|---|---|
| 120 gal | 24 in × 5 ft 8 in | 96 gal |
| 250 gal | 30 in × 7 ft 10 in | 200 gal |
| 500 gal | 41 in × 8 ft 8 1/2 in | 400 gal |
| 1,000 gal | 41 in × 15 ft 8 1/2 in | 800 gal |
How much more a propane tank can take stops at that line, not at the top. The 500-gallon tank with 30 in of liquid holds 413.1 gallons, already close to its 415.3-gallon fill limit, though 106.1 gallons of space remain above it. For water and oil tanks, the room left is simply the full capacity minus what is in the tank now.
With rounded heads, the Propane mode gives about 118, 257, 519 and 999 gallons for these four tanks at their outside sizes, close to their ratings.
Water Storage Tanks
- Rated gallons are less than the outside size: a Norwesco 1,550-gallon tank, 87 in across and 67 in tall, would be about 1,724 gallons as a plain cylinder.
- Weight: water weighs 62.37 lb per cubic foot at 60 °F, about 8.34 lb a gallon. The 564-gallon default tank full of water weighs about 4,700 lb before the tank itself. A vertical tank 64 in across and 80 in tall holds 1,114 gallons, about 9,290 lb, or 416 lb on each square foot of its base: ten times the 40 lb per sq ft a house floor is designed to carry (IRC Table R301.5). Set big tanks on a slab or a base made for them.
- Gauges: Norwesco tanks have gallon marks molded into the wall; read them where the shape is not a simple cylinder.
- Septic tanks are sized by the number of bedrooms rather than measured: size a septic tank by bedrooms.
Common Mistakes
- Diameter for radius: π × r² takes the radius, half the diameter. Using the full diameter gives four times the volume.
- Mixed units: cubic inches ÷ 231 give gallons, cubic feet × 7.48 give gallons. Feet multiplied by inches give nonsense; convert every size first.
- Straight-line thinking: in a round tank lying down, a quarter of the height is not a quarter of the volume. At 12 in of 48, the default tank is 20% full, not 25%.
- Forgotten heads: 2:1 elliptical heads on the 48 × 72 in tank add 125.3 gallons to the straight shell.
- Outside sizes: the wall, a domed top and a sloped bottom all take room from the liquid; measure inside or use the maker's chart.
Frequently Asked Questions
How do I calculate the volume of a horizontal tank?
Multiply its length by the area of the liquid's cross-section, a circular segment: r² × acos((r − h) ÷ r) − (r − h) × √(2rh − h²), with r the radius, h the liquid height and the angle in radians. In inches, divide by 231 for gallons. A 48 × 72 in tank with 12 in of liquid holds 110.3 gallons.
How many gallons are in a vertical cylinder tank?
π × radius² × liquid height, in inches, divided by 231. A tank 64 in across with 60 in of water holds 835.6 gallons; full to 80 in, 1,114.1.
How many gallons per inch is my tank?
In a vertical cylinder or a box, the same at every inch: π × r² ÷ 231 or length × width ÷ 231. In a round tank lying down it depends on the level: a 48 × 72 in tank holds 14.96 gallons per inch at the middle and 5.96 near the bottom.
How do I calculate the volume of a rectangular tank in gallons?
Length × width × liquid height in inches, divided by 231. A 48 × 24 in tank with 18 in of water holds 89.8 gallons, and 119.7 full to 24 in. In feet, multiply the cubic feet by 7.48.
How do I calculate the volume of a cone bottom tank?
Add the cone, π × r² × cone depth ÷ 3, to the cylinder above it, π × r² × the liquid above the cone. A tank 48 in across with a 24 in cone and a 48 in straight side holds 62.7 gallons in the cone and 438.7 full.
How do I calculate a horizontal tank with elliptical heads?
Add the heads to the straight shell. A pair of 2:1 elliptical heads, each a quarter of the diameter deep, holds π × D³ ÷ 12 when full: 125.3 gallons for a 48 in tank. With a 72 in shell, the tank holds 689.4 gallons full and exactly half at half its height.
What are the dimensions of a 275-gallon oil tank?
Granby lists its 275-gallon tank at 44 × 27 × 60 in, standing or lying down. It is not a box: the ends are rounded, so it holds about 268 gallons by its outside size, and Granby's chart reads 273.8 gallons at 44 in.
How do I read a 275-gallon oil tank?
Push a dipstick to the bottom, read the wet mark and look it up in the tank maker's chart, or enter it in the Oil Tank mode. A standing 275 at 22 in, half its height, holds about 134 to 137 gallons, and every inch between about 14 and 30 in is worth 7.01 gallons.
How much propane does a 500-gallon tank hold?
About 400 gallons. Propane tanks are rated by water capacity and filled to about 80%; OSHA's worked example allows 79.8 gallons in a 100-gallon tank.
How do I find gallons from cubic feet or liters?
Multiply cubic feet by 7.48; a US gallon is 231 cubic inches and a cubic foot is 1,728. One gallon is 3.785 liters, so divide liters by 3.785 for gallons.
How much does a full water tank weigh?
About 8.34 lb a gallon, plus the tank. The default 48 × 72 in tank full of water holds 564.0 gallons, about 4,700 lb, more than two tons.
Why is my water tank rated for less than its size?
Rated gallons account for the domed top, the rounded bottom and the wall thickness. A Norwesco 1,550-gallon tank, 87 in across and 67 in tall, would hold about 1,724 gallons as a plain cylinder at those outside sizes. Measure the inside, or use the maker's chart.
Sources
- American Society of Mechanical Engineers. (2023). ASME boiler and pressure vessel code, Section VIII, Division 1: Rules for construction of pressure vessels (UG-32).
- Granby Industries. (2026a). Capacity chart for vertical tanks (v1-1).
- Granby Industries. (2026b). Residential oil tanks [Brochure].
- International Code Council. (2020). 2021 International residential code (Table R301.5).
- Manchester Tank. (2025). Aboveground propane tanks 120–1000 gallons [Spec sheet].
- National Institute of Standards and Technology. (n.d.). NIST Handbook 44, Appendix C: General tables of units of measurement.
- Norwesco. (n.d.). Vertical water tanks [Product table].
- Occupational Safety and Health Administration. (2019). Storage and handling of liquefied petroleum gases, 29 C.F.R. § 1910.110.
- U.S. Geological Survey. (n.d.). Water density. Water Science School.
- Weisstein, E. W. (n.d.-a). Capsule. MathWorld—A Wolfram Resource.
- Weisstein, E. W. (n.d.-b). Cone. MathWorld—A Wolfram Resource.
- Weisstein, E. W. (n.d.-c). Horizontal cylindrical segment. MathWorld—A Wolfram Resource.
- Weisstein, E. W. (n.d.-d). Spherical cap. MathWorld—A Wolfram Resource.
Updated .
Cite this page as:
Daniel, P. Tank Volume Calculator. Available at: https://constructioncalculators.com/tank-volume-calculator/. Accessed: October 28, 2026.