How Many Pavers Do I Need?
A 12 × 10 ft patio is 120 sq ft. In 4 × 8 in pavers, at 4.72 a square foot, it takes 567 pavers; buy 623 with 10% extra. Under them go 3.39 tons of compacted base, 22 bags of bedding sand and 44 ft of edge restraint, about $890 in materials.
Pavers for common patio sizes, with 10% extra for a straight pattern:
| Patio | 4 × 8 | 12 × 12 | 16 × 16 |
|---|---|---|---|
| 8 × 8 ft | 333 | 72 | 41 |
| 10 × 10 ft | 520 | 113 | 63 |
| 12 × 10 ft | 623 | 135 | 76 |
| 12 × 12 ft | 748 | 162 | 91 |
| 10 × 20 ft | 1,039 | 225 | 126 |
| 16 × 16 ft | 1,329 | 288 | 161 |
| 20 × 20 ft | 2,077 | 450 | 252 |
| Patio | Sq ft | 4 × 8 in | 6 × 9 in | 12 × 12 in | 16 × 16 in |
|---|---|---|---|---|---|
| 8 × 8 ft | 64 | 333 | 195 | 72 | 41 |
| 10 × 10 ft | 100 | 520 | 304 | 113 | 63 |
| 12 × 10 ft | 120 | 623 | 365 | 135 | 76 |
| 12 × 12 ft | 144 | 748 | 438 | 162 | 91 |
| 10 × 20 ft | 200 | 1,039 | 608 | 225 | 126 |
| 16 × 16 ft | 256 | 1,329 | 778 | 288 | 161 |
| 20 × 20 ft | 400 | 2,077 | 1,216 | 450 | 252 |
In herringbone, or with curves and many cuts, add 15% instead: the same 12 × 10 ft patio then takes 652 pavers of 4 × 8 in.
Pavers per Square Foot by Size
Divide 144 by the paver's actual length times its width in inches. Concrete pavers are made about 1/8 in under their nominal size, so a 4 × 8 in paver measures about 3-7/8 × 7-7/8 in and 4.72 of them cover a square foot, not 4.50. Most have small spacer bars on their sides that hold the joint at 1/16 to 3/16 in, the width the Concrete Masonry & Hardscapes Association (CMHA) recommends.
| Paver | Per sq ft | Per 100 sq ft, +10% | Pavers per sq ft, $ |
|---|---|---|---|
| 4 × 8 in | 4.72 | 520 | $3.21 |
| 6 × 6 in | 4.17 | 459 | $3.34 |
| 6 × 9 in | 2.76 | 304 | $5.50 |
| 12 × 12 in | 1.02 | 113 | $2.00 |
| 16 × 16 in | 0.57 | 63 | $3.26 |
| 12 × 24 in | 0.51 | 56 | $3.26 |
| 24 × 24 in | 0.25 | 28 | $3.24 |
The last column is what the pavers alone cost per square foot. Big slabs cost more apiece but not per square foot; the 12 × 12 in patio block is the cheapest here because it is a thinner, pedestrian-only unit. Pavers for patios and driveways are 2-3/8 in thick; streets take at least 3-1/8 in.
Materials for a paver patio in 4 × 8 in pavers, with base, delivery, sand and edging:
The cost per square foot falls as the patio grows, from $7.42 on the 12 × 10 ft patio to $6.37 on a 20 × 20 ft one, because one base delivery covers both.
How to Calculate Pavers
Multiply the area by the pavers per square foot, then add the waste allowance and round up to whole pavers:
How to Measure a Patio for Pavers
- 1Stake out the patio, pull strings at the finished height and take its length and width along them, to the outside of the edge restraint.
- 2Split an L-shaped or irregular patio into rectangles, work out each one and add the counts.
- 3Pick the waste allowance: 10% for running bond or stack bond, 15% for herringbone, curves or many cuts.
- 4Round up to whole pavers, then to whole pallets or bundles if the yard sells them that way.
- 5Mix pavers from three or four bundles as you lay them, as the CMHA advises, so the color blends evenly.
Round Patios and Fire Pit Areas
For a circle, the area is 3.1416 × radius × radius. A 12 ft round patio has a 6 ft radius and covers 113.1 sq ft; with 15% for the curved cuts it takes 614 pavers of 4 × 8 in. Around a fire pit, subtract the pit: a 16 ft circle with a 4 ft pit in the middle is 3.1416 × (8 × 8 − 2 × 2) = 188.5 sq ft, or 1,023 pavers.
To run a circle through the calculator, enter a square of the same area, 10.63 × 10.63 ft for the 12 ft circle, and choose Herringbone or curves. Edging for a circle is 3.1416 × the diameter: 37.7 ft for the 12 ft patio. For a raised ring of wall block around the pit, count the wall blocks as for a retaining wall.
What Goes Under the Pavers
Pavers sit on a 1 in bed of sand over a layer of compacted crushed stone, held in by an edge restraint. The CMHA's minimums for well-drained soil:
| Use | Compacted base | Bedding sand | Paver thickness |
|---|---|---|---|
| Patio or walkway | 4 in | 1 in | 2-3/8 in |
| Residential driveway | 6 in | 1 in | 2-3/8 in |
| Residential street | 8–10 in | 1 in | 3-1/8 in |
Wet, weak or frost-prone soil needs a thicker base. The edge of a patio, in section:
- 1Pavers, 2-3/8 in thick, joints 1/16 to 3/16 in
- 21 in of concrete sand, screeded and left loose
- 34 in of crushed stone base, compacted in lifts
- 4Edge restraint on the base, spiked into it, never into the sand or soil
- 5The base runs past the spikes by at least its own depth
- 6Compacted subgrade
- Base: the base runs at least its own depth past the spikes of the restraint, so the calculator counts it over (12 + 8/12) × (10 + 8/12) ft = 135.11 sq ft for the default patio, not 120. Size the base on its own.
- Bedding sand: ASTM C33 concrete sand, 1 in thick before the pavers are compacted into it; never masonry sand or stone dust. Work out the bedding sand in cubic feet, bags and tons.
- Edge restraint: required along the whole perimeter, with at least 1 in of its face against the side of the pavers. Plastic edging spiked into the base suits patios, walks and residential driveways.
- Joints: swept full with joint sand or polymeric sand after the pavers are compacted; count the polymeric sand bags.
Slope the surface at least 1.5% so water runs off, about 3/16 in per foot, away from the house.
Paver Patterns and Waste
The same 12 × 10 ft patio in 4 × 8 in pavers, laid in running bond and in 90° herringbone:
Running bond and stack bond leave a straight edge on two sides, so few pavers are cut. Herringbone meets every edge at an angle and needs a cut on almost every edge paver; a 45° herringbone cuts even more. The CMHA recommends 45° or 90° herringbone wherever cars turn and brake on the pavers, because the interlock spreads the load and resists creep, so it is the pattern to choose for a driveway.
A 12 × 40 ft paver driveway in 4 × 8 in pavers takes 2,492 pavers with 10% extra on 20.09 tons of base 6 in deep. Choose Driveway under Use and the calculator switches to the thicker base. To set pavers against concrete, asphalt and gravel for the whole driveway, installed, compare driveway costs.
Pavers vs. Concrete
Pavers cost more in materials. The 4 × 8 in pavers alone run about $3.21 a sq ft; ready-mix concrete 4 in thick, at $165 a cubic yard, comes to about $2.04 a sq ft, since a yard covers 81 sq ft at that depth. Concrete also needs forms and finishing, and the pavers need base, sand and edging, so compare whole jobs: price the same slab in concrete.
What pavers give back: they need no curing time, a cracked or stained paver can be pulled and replaced, and you can lift a section to reach a pipe and lay it again. Concrete pavers made to ASTM C936 reach at least 8,000 psi with no more than 5% absorption, which is what lets 2-3/8 in units carry cars.
Common Paver Mistakes
- Fixing low spots with sand. The bed stays an even 1 in. Unevenness in the sand shows through the pavers within a season, so level the base instead.
- The wrong sand. Masonry sand, stone dust and limestone screenings hold water and don't compact evenly; bedding sand is coarse, washed concrete sand.
- Skipping compaction. The soil, each 4 to 6 in lift of base, and the laid pavers all get a plate compactor; the pavers need at least two passes to seat them and push sand up into the joints.
- Restraints on the sand. Edging set on top of the bedding sand or pinned into soil lets the edge pavers creep. It goes on the compacted base.
- Slivers at the edge. Gaps wider than 3/8 in get a cut paver; plan the layout so edge cuts are not tiny slivers that break loose.
- No fall. A flat patio holds water against the house. Set the strings for at least 1.5% before you dig.
Buying Pavers
- Order once. Color shifts from one production run to the next, so buy the whole job, waste included, in one order.
- Count pallets. One maker ships its 4 × 8 in Holland paver 480 to a pallet, about 103 sq ft at 2,884 lb; the 623 pavers for the default patio are about 1.3 pallets.
- Plan the weight. The 623 pavers plus 3.39 tons of base are more than most pickups should carry; have the base delivered.
- Price per square foot. Compare pavers by cost per square foot, not per piece: a 6 × 9 in paver at $1.99 costs more per square foot than a 4 × 8 in paver at $0.68, even though fewer are needed.
Frequently Asked Questions
How many pavers do I need for a 12 × 12 patio?
748 pavers of 4 × 8 in with 10% extra, or 162 of 12 × 12 in and 91 of 16 × 16 in. A 12 × 12 ft patio is 144 sq ft; laid in herringbone, the 4 × 8 count rises to 782.
How many pavers are in a square foot?
4.72 pavers of 4 × 8 in, 4.17 of 6 × 6 in, 2.76 of 6 × 9 in, 1.02 of 12 × 12 in and 0.57 of 16 × 16 in. Pavers are made about 1/8 in under their nominal size so a joint fits, which is why a square foot holds a little more than the nominal sizes suggest.
How many pavers do I need for a 10 × 20 patio?
1,039 pavers of 4 × 8 in, 608 of 6 × 9 in or 225 of 12 × 12 in, each with 10% extra. The 200 sq ft patio also needs about 5.54 tons of base and 37 bags of bedding sand.
How many pavers are on a pallet?
It depends on the paver. One maker's 4 × 8 in Holland paver, 2-3/8 in thick, ships 480 to a pallet, about 103 sq ft, and the pallet weighs 2,884 lb. The 623 pavers for a 12 × 10 ft patio are about 1.3 pallets.
How many pavers do I need for a round patio or fire pit area?
Find the area as 3.1416 × radius × radius, then multiply by the pavers per square foot and add 15% for the curved cuts. A 12 ft round patio is 113.1 sq ft, 614 pavers of 4 × 8 in; a 16 ft circle around a 4 ft fire pit is 188.5 sq ft, 1,023 pavers.
How much base do I need for pavers?
At least 4 in of compacted base under a patio or walkway and 6 in under a driveway, running past the edges by its own depth. For the 12 × 10 ft patio that is about 3.39 tons of crushed stone with 10% extra.
How much sand do I need under pavers?
A 1 in bed of concrete sand: the area in square feet divided by 12 gives cubic feet. The 120 sq ft patio takes 10 cu ft, or 22 bags of 0.5 cu ft with 10% extra.
How many extra pavers should I buy?
Add 10% for a straight running bond or stack pattern and 15% for herringbone, curves or a lot of cuts. A few spares left over are worth keeping for repairs later.
Are pavers cheaper than concrete?
Not in materials. 4 × 8 in pavers alone cost about $3.21 a sq ft against about $2.04 for ready-mix concrete 4 in thick at $165 a cubic yard, and pavers also need base, sand and edging. Pavers can be lifted and relaid when something under them needs fixing.
How much does a paver patio cost per square foot?
About $7.42 a sq ft in materials for the 12 × 10 ft example, $890 in all, and about $6.37 for a 20 × 20 ft patio, where the delivery is spread over more area. Tools, the plate compactor and labor are on top.
Sources
- Concrete Masonry & Hardscapes Association. (2022a). Construction of interlocking concrete pavements (PAV-TEC-002-22).
- Concrete Masonry & Hardscapes Association. (2022b). Edge restraints for interlocking concrete pavements (PAV-TEC-003-22).
- The Quikrete Companies. (2025). Pavestone Holland 60mm [Product sheet].
- Wisconsin Department of Transportation. (2024). 2025 standard specifications (Section 305, Dense-graded base).
Updated .
Cite this page as:
Daniel, P. Paver Calculator. Available at: https://constructioncalculators.com/paver-calculator/. Accessed: October 28, 2026.