How Many Bags of Self-Leveler Do I Need?
A 12 × 10 ft floor poured 1/4 inch thick on average takes 2.5 cubic feet of self-leveler, 2.75 with 10% extra. That is 6 bags of 50 lb LevelQuik RS, mixed with about 33 quarts of water.
Bags per 100 square feet, before extra:
| Thickness | LevelQuik | Henry | K 15 |
|---|---|---|---|
| 1/8 in | 2.1 | 2.3 | 1.7 |
| 1/4 in | 4.3 | 4.7 | 3.3 |
| 1/2 in | 8.5 | 9.3 | 6.7 |
| 1 in | 17.0 | 18.6 | 13.3 |
| Average thickness | LevelQuik RS | Henry 555 | Ultraplan Easy | ARDEX K 15 |
|---|---|---|---|---|
| 1/8 in | 2.1 | 2.3 | 2.1 | 1.7 |
| 1/4 in | 4.3 | 4.7 | 4.2 | 3.3 |
| 1/2 in | 8.5 | 9.3 | 8.3 | 6.7 |
| 1 in | 17.0 | 18.6 | 16.7 | 13.3 |
Bags differ in weight, 40 to 55 lb, and in yield, so count bags for the product you will buy: the same floor takes 7 bags of Henry 555 but 5 of ARDEX K 15.
Bags of LevelQuik RS for the 12 × 10 ft floor at five average thicknesses, with 10% extra:
Thickness drives everything. Each extra 1/8 inch across this floor is about three more bags, so a floor that averages 1/2 inch instead of 1/4 needs twice the material.
Average Thickness, Not the Minimum
Self-leveler fills the low spots, so the floor takes more than its thinnest point suggests:
- 1Level top of the pour
- 2At least 1/8 in over the highest point
- 3Low spots take the most material
- 4Average depth: 1/4 in, the number to enter
- 5Primer on the concrete first
Henry and ARDEX call for at least 1/8 inch over the highest point, which they say usually means an average of 1/4 inch or more. MAPEI allows as little as 1/16 inch over the high point, and LevelQuik RS and Henry 555 can be feathered to nothing where they meet an existing floor.
How to Calculate Self-Leveler
Multiply the area by the average thickness, convert to cubic feet and divide by what one bag makes:
The yield comes from each maker's coverage: square feet at a thickness × the thickness in feet. To find the average thickness on your floor:
- 1Find the highest point with a long straightedge or a laser level.
- 2Measure how far below the level line the floor sits at points across the room, more of them where it dips.
- 3Add 1/8 inch to every reading for the cover over the high point.
- 4Average the readings and enter that as the average thickness. For uneven rooms, split the floor into areas and run each one.
Coverage by Product
| Product | Bag | Coverage |
|---|---|---|
| LevelQuik RS | 50 lb | 46–48 sq ft at 1/8 in |
| Henry 555 | 40 lb | 43 sq ft at 1/8 in |
| Ultraplan Easy | 50 lb | 24 sq ft at 1/4 in |
| ARDEX K 15 | 55 lb | 30 sq ft at 1/4 in |
| Product | Bag | Coverage (data sheet) | Water a bag | Neat pour up to |
|---|---|---|---|---|
| LevelQuik RS | 50 lb | 46–48 sq ft at 1/8 in | 5 1/4–5 3/4 qt | 1 1/2 in |
| Henry 555 LevelPro | 40 lb | 43 sq ft at 1/8 in | 5 qt | 1 1/2 in |
| MAPEI Ultraplan Easy | 50 lb | 24 sq ft at 1/4 in | 5 3/4–6 qt | 2 in |
| ARDEX K 15 | 55 lb | 30 sq ft at 1/4 in | 7 qt | 1 1/2 in |
Coverage halves each time the thickness doubles: LevelQuik RS covers 23 to 24 sq ft at 1/4 inch and 11.5 to 12 at 1/2 inch. Store listings sometimes print lower figures than the maker; the calculator uses the data sheet.
How Thick Can Self-Leveling Concrete Be?
- Neat: up to 1 1/2 inches for LevelQuik RS, Henry 555 and ARDEX K 15, up to 2 inches in one lift for Ultraplan Easy. The calculator flags a thickness past the product's limit.
- With aggregate: Henry and ARDEX go up to 5 inches by mixing in washed pea gravel. Henry calls for 1/8 to 3/8 in gravel, one part to the mixed bag by volume, no larger than a third of the pour depth, and no sand.
- Thin: at least 1/8 inch over the high point for Henry and ARDEX, 1/16 inch for MAPEI.
Past those depths, regular concrete is usually the better material. A slab-on-ground floor under the IRC is at least 3 1/2 inches thick; work out a full concrete slab instead.
What Can You Pour Self-Leveler Over?
- Concrete: old or new, clean and sound, primed with the maker's primer.
- Plywood or OSB: Henry 555 needs at least 3/4 in tongue-and-groove plywood or OSB, sanded to bare wood, primed with undiluted HENRY 554 and covered with galvanized metal lath stapled about every 6 inches.
- Ceramic tile: roughen the glaze and prime it (Henry); LevelQuik RS also lists existing ceramic tile.
- Old adhesive: Henry 555 goes over cutback adhesive scraped down to a thin stain and primed.
- Not over: hardwood, luan, particle board, parquet, cushion-back vinyl or metal, by Custom's data sheet for LevelQuik RS.
All four are underlayments for interior floors that will get a covering: tile, vinyl, wood or carpet. ARDEX and Custom say not to use theirs as a wear surface, MAPEI and ARDEX limit theirs to interior use, and LevelQuik RS allows only covered exterior spots such as entryways and porches.
Primer and Mixing
- Henry 555: HENRY 554 primer diluted 1:1 with water over concrete, two coats on very absorbent concrete; a quart covers 100 to 150 square feet.
- LevelQuik RS: LevelQuik primer at 1:3 on porous surfaces, 150 to 300 square feet per quart.
- ARDEX K 15: ARDEX P 51 at 1:1, 400 to 600 square feet per gallon per coat.
- Ultraplan Easy: an appropriate MAPEI primer, per its data sheet.
For the default floor, that is one quart of HENRY 554 or LevelQuik primer. Mix each bag with the water on the bag, not more: Henry warns that a yellowish foam means too much water. Henry also calls for a 1/2 in drill at 650 rpm or more with a mixing paddle, and gives about 10 minutes of flow time at 70°F, so work bag after bag without a break.
Drying Time Before Flooring
| Product | Walk on | Tile | Other floors |
|---|---|---|---|
| LevelQuik RS | 2–4 hours | after 4 hours | after 16 hours |
| Henry 555 | 2–3 hours | after 6 hours | after 16 hours |
| Ultraplan Easy | 2–3 hours | after 3 hours | 16–24 hours |
| ARDEX K 15 | 2–3 hours | after 6 hours | after 16 hours |
The times are at about 70°F; cold and humidity slow them. Count the tile, or the planks and underlayment, for the floor on top.
What Self-Leveler Costs
A 50 lb bag of LevelQuik RS is $39.99, so the default 6 bags come to about $240 before primer, $2.00 per square foot at 1/4 inch. The same floor costs about the same in Henry 555 or Ultraplan Easy and more in ARDEX K 15:
| Product | Bags | Cost | Per sq ft |
|---|---|---|---|
| LevelQuik RS, 50 lb | 6 | $240 | $2.00 |
| Henry 555, 40 lb | 7 | $245 | $2.04 |
| Ultraplan Easy, 50 lb | 6 | $248 | $2.06 |
| ARDEX K 15, 55 lb | 5 | $373 | $3.11 |
| Product | Price a bag | Bags | Cost | Per sq ft |
|---|---|---|---|---|
| LevelQuik RS, 50 lb | $39.99 | 6 | $240 | $2.00 |
| Henry 555, 40 lb | $35.00 | 7 | $245 | $2.04 |
| Ultraplan Easy, 50 lb | $41.28 | 6 | $248 | $2.06 |
| ARDEX K 15, 55 lb | $74.54 | 5 | $373 | $3.11 |
The cost scales with thickness: at 1/8 inch the default floor takes 3 bags, about $120, and at 1/2 inch 12 bags, about $480. If you plan to coat the floor rather than cover it, size the coating with the epoxy calculator.
Frequently Asked Questions
How many bags of self-leveler do I need?
Multiply the floor area by the average thickness in inches, divide by 12 for cubic feet, and divide by the bag's yield. A 12 × 10 ft floor at 1/4 inch takes 2.5 cubic feet, 2.75 with 10% extra: 6 bags of LevelQuik RS, which yields about 0.49 cubic feet a bag.
How much does a bag of self-leveling compound cover?
By the makers' data sheets: a 50 lb bag of LevelQuik RS covers 46 to 48 square feet at 1/8 inch and 23 to 24 at 1/4 inch; a 40 lb bag of Henry 555 covers 43 square feet at 1/8 inch; a 50 lb bag of Ultraplan Easy 24 at 1/4 inch; a 55 lb bag of ARDEX K 15 30 at 1/4 inch.
How many bags of self-leveler for 100 square feet?
At 1/4 inch, about 4.3 bags of LevelQuik RS, 4.7 of Henry 555, 4.2 of Ultraplan Easy or 3.3 of ARDEX K 15, so buy 5 or 4. At 1/8 inch, about half that.
How thick can self-leveling concrete be poured?
Up to 1 1/2 inches neat for LevelQuik RS, Henry 555 and ARDEX K 15, and up to 2 inches in one lift for Ultraplan Easy. Henry and ARDEX allow up to 5 inches with added pea gravel.
What thickness should I use in the calculator?
The average, not the minimum. Henry and ARDEX call for at least 1/8 inch over the highest point, which they say usually works out to an average of 1/4 inch or more.
How much water per bag of self-leveler?
About 5 quarts for a 40 lb bag of Henry 555, 5 1/4 to 5 3/4 quarts for a 50 lb bag of LevelQuik RS, 5 3/4 to 6 for Ultraplan Easy and 7 for a 55 lb bag of ARDEX K 15. Follow the bag; extra water weakens the pour.
Do I need primer before self-leveler?
Yes, the makers call for their primer over concrete: Henry 554 diluted 1:1, LevelQuik primer at 1:3 on porous surfaces, ARDEX P 51 at 1:1. Very absorbent concrete gets two coats.
How much does self-leveling concrete cost per square foot?
About $2 per square foot at 1/4 inch in LevelQuik RS at $39.99 a bag, and about $1 at 1/8 inch, before primer. ARDEX K 15 costs about $3.11 per square foot at 1/4 inch.
Can you put self-leveler over plywood or tile?
Yes, with preparation. Henry 555 goes over 3/4 in plywood or OSB primed with undiluted HENRY 554 and covered with stapled metal lath, and over ceramic tile once the glaze is roughened and primed. LevelQuik RS should not be bonded directly to hardwood, luan, particle board or cushion vinyl.
How long before you can walk on self-leveler?
About 2 to 3 hours for Henry 555, ARDEX K 15 and Ultraplan Easy, and 2 to 4 hours for LevelQuik RS. Tile can go down after 3 to 6 hours depending on the product; vinyl, wood and other moisture-sensitive floors usually wait 16 hours or more.
Sources
- ARDEX Americas. (2026a). ARDEX K 15 premium self-leveling underlayment [Technical data sheet].
- ARDEX Americas. (2026b). ARDEX P 51 primer [Technical data sheet].
- Custom Building Products. (n.d.). LevelQuik primer (TDS-234) [Product page]. Retrieved October 26, 2026.
- Custom Building Products. (2024). LevelQuik RS rapid setting self-leveling underlayment (TDS-108) [Technical data sheet].
- International Code Council. (2020). 2021 International Residential Code (Section R506.1).
- MAPEI Corporation. (2022). Ultraplan Easy [Technical data sheet].
- W. W. Henry Company. (n.d.). HENRY 554 LevelPro underlayment primer [Technical data sheet].
- W. W. Henry Company. (2015). HENRY 565 FloorPro self-leveling underlayment [Technical data sheet].
- W. W. Henry Company. (2025). HENRY 555 LevelPro self-leveling underlayment [Technical data sheet].
Updated .
Cite this page as:
Daniel, P. Self-Leveling Concrete Calculator. Available at: https://constructioncalculators.com/self-leveling-concrete-calculator/. Accessed: October 28, 2026.